6130 SERIES DUAL SAFETY LIGHT CURTAIN SIZE
WARNING NOTICE: The purchase has the responsibility to ensure that the presence sensing device is properly installed. Before operating any protected equipment it must be determined that the machine can stop in less time than it takes for an operator to interrupt the light curtain and reach a danger point per OSHA Standard 1910.217 distance formula. If the light curtain does not protect all accesses to the danger point, The unprotective area must be guarded by other approved devices or means in accordance with OSHA 1910.217 and ANSI B 11.1 (section2). Do Not use this device on a full revolution clutch press or machine which does not incorporate a part rev braking system.
The 6130 Thin line dual series consists of (2) projector units and (2) receiver units and a Standard control box. This configuration allows front & back guarding using one control box. The dual systems do not allow segment blanking capability.
Unit Part Number Protection height
SL-6130-2112-2 .........................................12" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2180-12P projector unit,
(2) 6130-2188-12R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2118-2 .........................................18" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2181-18P projector unit,
(2) 6130-2189-18R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2124-2 ........................................24" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2182-24P projector unit,
(2) 6130-2190-24R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2130-2 ......................................30" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2183-30P projector unit,
(2) 6130-2191-30R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2136-2 ........................................36" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2184-36P projector unit,
(2) 6130-2192-36R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2142-2 ......................................42" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2185-42P projector unit,
(2) 6130-2193-42R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2148-2 ......................................48" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2186-48P projector unit,
(2) 6130=2194-48R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
SL-6130-2154-2 .....................................54" Dual Safety Light Curtain System
Complete system includes: (1) CB-1321-AS Standard control box, (2) 6130-2187-54P projector unit,
(2) 6130-2195-54R Receiver unit, (2) CB-1871-AS 42ft projector cable, (2) CB-1872-AS Receiver cable,
(4) MT-1410-AS Isolator mounting kits, and (1) MN-6130-AS Warning/Installation/User manual
WARNING NOTICE: The purchase has the responsibility to ensure that the presence sensing device is properly installed. Before operating any protected equipment it must be determined that the machine can stop in less time than it takes for an operator to interrupt the light curtain and reach a danger point per OSHA Standard 1910.217 distance formula. If the light curtain does not protect all accesses to the danger point, The unprotective area must be guarded by other approved devices or means in accordance with OSHA 1910.217 and ANSI B 11.1 (section2). Do Not use this device on a full revolution clutch press or machine which does not incorporate a part rev braking system.
Consult Factory For Current pricing KTI Technologies, Inc 1-732-446-3933
6120 Safety Lights 6130 Safety Lights 9020 Press Controls Press Control Up-Grades PMD Die Protection
6120 Series Light Curtain Parts 6130 Series Light Curtain Parts Brake Monitors RF Sensing Unit AutoMic Die Protection
Contact Us Your Privacy About KTI Technologies Go To KTI Online Store